manualshive.com logo in svg

NEC V850E/MS1 UPD703100, User Manual

The "NEC V850E/MS1 UPD703100" User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on how to effectively operate and utilize the features of this product. Access the manual at manualshive.com to enhance your experience with the NEC V850E/MS1 UPD703100.

Share
Download
background image

User’s Manual  U12688EJ4V0UM00

27

CHAPTER  1   INTRODUCTION

The V850E/MS1 is one of NEC’s “V850 Family

TM

” of single-chip microcontrollers.  This chapter gives a simple

outline of the V850E/MS1.

1.1

Outline

The V850E/MS1 is a 32-/16-bit single-chip microcontroller which uses the V850 Family’s “V850E” CPU, and

incorporates peripheral functions such as ROM, RAM, various types of memory controllers, a DMA controller, real-

time pulse unit, serial interface and A/D converter, realizing large volume data processing and sophisticated real-time

control.

(1) “V850E” CPU included

The “V850E” CPU supports the RISC instruction set, and through the use of basic instructions, each of which

can be executed in 1 clock period, and an optimized pipeline, achieves a marked improvement in instruction

execution speed.  In addition, in order to make it ideal for use in digital servo control, a 32-bit hardware

multiplier enables this CPU to support multiply instructions, saturated multiply instructions, bit operation

instructions, etc.

Also, through 2-byte basic instructions and instructions compatible with high level languages, etc., the object

code efficiency in a C compiler is increased, and the program size can be made more compact.

Further, since the on-chip interrupt controller provides a high speed interrupt response, including processing,

this device is suited to high level real-time control fields.

(2) External memory interface function

The V850E/MS1 features various on-chip external memory interfaces including separately address configured

(24 bits) and data (16 bits) buses, and SRAM and ROM interfaces, as well as on-chip memory controllers that

can be directly linked to EDO DRAM, high-speed page DRAM, page ROM, etc., thereby raising the system

performance and reducing the number of parts needed for application systems.

Also, through the DMA controller, CPU internal calculations and data transfers can be performed

simultaneously with transfers with external memory, so it is possible to process large volumes of image data or

voice data, etc., and through the high-speed execution of instructions using internal ROM and RAM, motor

control, communications control and other real-time control tasks can be realized simultaneously.

(3) On-chip flash memory (

µµµµ

PD70F3102, 70F3102A)

The on-chip flash memory model (

µ

PD70F3102, 70F3102A) has on-chip flash memory which is capable of

high speed access, and since it is possible to rewrite a program with the V850E/MS1 mounted as is in the

application system, system development time can be reduced and system maintainability after shipping can be

markedly improved.

(4) A full range of middleware and development environment products

The V850E/MS1 can execute middleware such as JPEG, JBIG and MH/MR/MMR at high speed.  Also,

middleware that enables voice recognition, voice synthesis and other such processing is available; by

including these middleware programs, a multimedia system can be easily realized.

A development environment system that includes an optimized C compiler, debugger, in-circuit emulator,

simulator, system performance analyzer and other elements is also available.

Summary of Contents for V850E/MS1 UPD703100


































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for V850E/MS1 UPD703100

Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Brand: Eastern Times Technology Pages: 4
Vacon 10 Quick Manual preview
10
Brand: Vacon Pages: 18
Panasonic FP7 Series Additional Functions Manual preview
FP7 Series
Brand: Panasonic Pages: 45
Hafele DT 100 Operating Instructions Manual preview
DT 100
Brand: Hafele Pages: 82
Campbell CR10 PROM Replacement Procedure preview
CR10 PROM
Brand: Campbell Pages: 8
RadioMaster POCKET Quick Start Manual preview
POCKET
Brand: RadioMaster Pages: 10
Harman Kardon OMNI 10 Quick Start Manual preview
OMNI 10
Brand: Harman Kardon Pages: 25
Uniss SR601 Operation Instructions Manual preview
SR601
Brand: Uniss Pages: 21
ICP DAS USA I-7188XA User Manual preview
I-7188XA
Brand: ICP DAS USA Pages: 166
ICP DAS USA SMS-531 User Manual preview
SMS-531
Brand: ICP DAS USA Pages: 64
ICS Tunnel Master Jr Manual preview
Tunnel Master Jr
Brand: ICS Pages: 83
Centurion TB-CN2R1 Instruction Manual preview
TB-CN2R1
Brand: Centurion Pages: 16
Elotech R 1300 Description And Operating Manual preview
R 1300
Brand: Elotech Pages: 20
Intermatic NE 1 Operating Instructions preview
NE 1
Brand: Intermatic Pages: 2
Woodward ProAct III Installation And Operation Manual preview
ProAct III
Brand: Woodward Pages: 32
NXP Semiconductors Freescale Xtrinsic LFSTBEB865X Quick Start Manual preview
Freescale Xtrinsic LFSTBEB865X
Brand: NXP Semiconductors Pages: 2
Black Stone BL 981411-0 Instruction Manual preview
BL 981411-0
Brand: Black Stone Pages: 2
TAC Xenta 102 Handbook preview
Xenta 102
Brand: TAC Pages: 76

Brands by name

Popular brands

Load more brands