5.
After the settings of fabric parameters are changed completely, type "n" or press [Enter] for any
message following "Insistent Domain ID Mode" asking whether setting is done or not.
Insistent Domain ID Mode (yes, y, no, n): [no]
Virtual Channel parameters (yes, y, no, n): [no]
F-Port login parameters (yes, y, no, n): [no]
Zoning Operation parameters (yes, y, no, n): [no]
RSCN Transmission Mode (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
Portlog events enable (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
cfgload attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [yes]
Custom attributes (yes, y, no, n): [no]
system attributes (yes, y, no, n): [no]
System (yes, y, no, n): [no]
WARNING: The domain ID will be changed. The port level zoning may be affected
ALE044120T2:admin>
6.
To make the features of the 8G FC Switch effective, type "switchenable" command.
ALE044120T2:admin> switchenable
- 165 -
Summary of Contents for SigmaBlade N8406-040(F)
Page 2: ... 2 ...
Page 121: ... AG モード接続例 ブレード収納ユニット4台とiStorage WB3x0A NF9340 SS017 SS018 SS019 2台をAGモードで接続する場合 121 ...
Page 205: ... 205 ...
