NEC SigmaBlade N8406-040(F), User Manual

Page: 176 / 206

NOTE:
„ Check the value of "switchname" in "switchshow" to check that the 8G FC Switch is
subject to zoning.
2) Creating zone
Use the "zonecreate" command to create a zone.
„
Format of "zonecreate" command
zonecreate "zonename" , "member;member;member"
(1) (2)
(1) zonename:
Specify a zone name with it enclosed by double quotation marks (").
(2) member:
Specify a domain ID and a port number (decimal) with them delimited by a comma (,).
NOTE:
„
Delimit the zone name and the first port with a comma (,).
„ Delimit adjacent port specifications with a semicolon (;).
IMPORTANT:
„ A zone name can be up to 64 alphanumeric characters.
„ This command must be done by the number of zones to be created.
3.
Use the "zonecreate" command on the console screen to create zones.
ALE044120T2:admin> zonecreate "zone1","1,0;1,1"
ALE044120T2:admin> zonecreate "zone2","1,2;1,3"
ALE044120T2:admin> zonecreate "zone3","1,4;1,5"
ALE044120T2:admin> zonecreate "zone4","1,6;1,7"
NOTE:
„ Any commands used on the switch console should be specified with lowercase letters.
4.
Type "zoneshow" command on the console screen.
ALE044120T2:admin> zoneshow
Defined configuration:
zone:
zone1 1,0; 1,1
zone: zone2 1,2; 1,3
zone: zone3 1,4; 1,5
zone: zone4 1,6; 1,7
Effective configuration:
no configuration in effect
ALE044120T2:admin>
- 176 -