NEC SigmaBlade N8406-040(F), User Manual

Page: 137 / 206

Removal Procedure
1.
Pull down the lever on the SFP+ module.
N8406-040/042 4/8G FC Switch
SFP+ module
Pull down
the lever
2.
Hold the lever and pull out the module in the arrow direction shown in the figure.
Pull-out
direction
IMPORTANT:
„ Before the SFP+ module can be removed, the lever should always be lowered. If the
SFP+ module is pulled out without the lever lowered, the SFP+ module and/or slot may
be damaged.
„ Put the dust covers attached to the SFP+ modules on them to protect the FC
connectors from dust.
3.
Install a cap in SFP+ port from which the SFP+ module was just removed.
IMPORTANT:
„
Put the cap attached to the 8G FC Switch on them to protect the SFP+ port from
dust.
„ There is’t the caps for ports 17 and 18 at N8406-040.
„ There is’t the caps for ports 17, 18, 19 and 20 at N8406-042.
- 137 -