NOTE:
■
After network setting is completed, the network daemon program in the
firmware of the FC Switch Module automatically restarts the FC Switch
Module. The network setting is enabled just after the auto restart.
■
To access to an FC Switch Module via network, some settings may be
required in the Blade Enclosure (SIGMABLADE). For the settings, refer to the
User’s Guide of the EM Card.
■
"Fibre Channel IP Address" and "Fibre Channel Subnetmask" are unavailable.
Do not change their settings.
■
If some network settings are changed during system operation, an error
message may appear on a log of the host connecting with the FC Switch
Module at the restart by the network daemon program.
- 145 -
Summary of Contents for SigmaBlade N8406-040(F)
Page 2: ... 2 ...
Page 121: ... AG モード接続例 ブレード収納ユニット4台とiStorage WB3x0A NF9340 SS017 SS018 SS019 2台をAGモードで接続する場合 121 ...
Page 205: ... 205 ...
