4.
After the settings are changed completely, type "portcfgshow" command.
Make sure that the new data is reflected on the screen display. The processing is completed if the
data rate of each port is changed to the new data.
Changing Port Topology
After completing login to the console of the 8G FC Switch, change the topology of external ports on
the 8G FC Switch according to the procedure below. (The port topology must always be set.)
Setting at shipment from factory
The port topology (Locked G_Port) is set as follows when an 8G FC Switch is shipped from the
factory.
External ports:
ON (Valid: only fabric devices connectable)
Internal ports:
·· (Invalid: Select Auto as the topology.)
IMPORTANT:
The port topology of an 8G FC Switch must be set to be the same as the port topology
of fibre channel devices connected to the 8G FC Switch. If the port topologies are
different, the connected fibre channel devices cannot link up to the 8G FC Switch. For
the port topology of each fibre channel device to be connected to an 8G FC Switch,
refer to the User’s Guide of the fibre channel device.
1.
Type "portcfgshow" command on the console screen.
NOTE:
Any commands used on the switch console should be specified with lowercase letters.
2.
The current port settings appear.
ALE044120T2:admin> portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-----------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--
Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN
Fill Word 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
AL_PA Offset 13 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked L_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked G_Port ON .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Disabled E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Persistent Disable.. ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
NPIV capability ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
QOS E_Port AE AE AE AE AE AE AE AE AE AE AE AE AE AE AE AE
Mirror Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Rate Limit .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Credit Recovery ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
Fport Buffers .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Port Auto Disable .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Ports of Slot 0 16 17 18 19 20 21 22 23
-----------------+--+--+--+--+----+--+--+--
Speed AN AN AN AN AN AN AN AN
- 159 -
Summary of Contents for SigmaBlade N8406-040(F)
Page 2: ... 2 ...
Page 121: ... AG モード接続例 ブレード収納ユニット4台とiStorage WB3x0A NF9340 SS017 SS018 SS019 2台をAGモードで接続する場合 121 ...
Page 205: ... 205 ...
