NEC SigmaBlade N8406-040(F), User Manual

Page: 123 / 206

IMPORTANT:
„ Do not install the 8G FC Switch in any Blade Enclosure (SIGMABLADE) unauthorized
by NEC. Do not connect the 8G FC Switch with any fibre channel devices unauthorized
by NEC. If the 8G FC Switch can be installed in an unauthorized Blade Enclosure
(SIGMABLADE) and connect with unauthorized fibre channel devices, the 8G FC
Switch and/or the fibre channel devices may not operate normally or further may be
defected.
„ For Blade Enclosures (SIGMABLADE) in which the 8G FC Switch can be installed and
fibre channel devices which can be connected to the 8G FC Switch, contact your
service representative.
„ To connect fibre channel devices to external ports of the 8G FC Switch, Special SFP+
modules are required additionally.
2.
Components
The shipping carton contains the following items. Make sure that all components are packaged. If one
or more components are missed or damaged, contact your service representative.
„
8G FC Switch
„
4/8G SFP+ module (N8406-040 : 2 pcs, N8406-042 : 4pcs)
„
User’s Guide
„
Warranty
NOTE:
„ Warranty is not included in the product is built into the system at the time of
shipment. It is listed in the warranty of Blade Enclosure.
„ Warranty is available only for using in Japan. Do not use it in other than Japan.
- 123 -