Saving/Disabling Configuration
The following describes the method of saving configuration after modification or disabling the
configuration files being enabled.
1.
Save configuration subjected to modification.
Use the "cfgsave" command.
Using the "cfgsave" command allows modified configuration to be saved.
Format of "cfgsave" command
cfgsave <enter>
IMPORTANT:
Executing the "cfgsave" command allows new information resulting from modification at
the execution to be saved.
If configurations are saved by this command, the configurations set after system
rebooting are enabled.
2.
Disable configuration files being enabled.
Use the "cfgdisable" command.
Using the "cfgdisable" command allows enabled configuration files to be disabled.
Format of "cfgdisable" command
cfgdisable <enter>
IMPORTANT:
Executing the "cfgdisable" command allows all zone configurations enabled at the
execution to be disabled.
- 186 -
Summary of Contents for SigmaBlade N8406-040(F)
Page 2: ... 2 ...
Page 121: ... AG モード接続例 ブレード収納ユニット4台とiStorage WB3x0A NF9340 SS017 SS018 SS019 2台をAGモードで接続する場合 121 ...
Page 205: ... 205 ...
