Adding Options 6-71
Connecting the Microphone
Connect the microphone to your system as follows:
1.
Plug the microphone cable connector into the
microphone in jack on the rear of the system.
2.
Mount the microphone (see the following figure).
n
Remove the center and the backing from one side of
the adhesive pad that comes with the microphone.
Attach the pad to the microphone holder.
n
Remove the backing from the other side of the adhe-
sive pad and attach it to where you wish to keep the
microphone (on your computer, for example).
n
Slide the microphone into the holder.
Setting up the microphone
Summary of Contents for POWERMATE VP
