Adding Options 6-45
See “Device Preparation” earlier in this chapter for
device preparation information.
If your 5 1/4-inch device comes with drive
rails, do not attach them. Remove any rails already
attached. See the documentation that comes with
the device.
2.
Remove the system unit cover (see Chapter 5).
WARNING:
Be sure that system power
is
off
and the system and its peripherals are
un-
plugged
before you begin the installation procedure.
3.
Remove the 3 1/2-inch drive bracket containing the
standard 1.44-MB diskette drive and hard disk as
follows.
All device installations (3 1/2-inch and
5 1/4-inch devices) require the removal of the 3 1/2-
inch drive bracket.
Summary of Contents for POWERMATE VP
