Removing the System Unit Cover 5-1
Removing the System
Unit Cover
This chapter provides cover removal and replacement pro-
cedures for the system unit. You need to remove the sys-
tem unit cover to
n
install any expansion options, such as expansion
boards, memory modules and drives.
n
check or change system configuration switches.
DESKTOP SYSTEM UNIT COVER
Use the following procedures to remove and replace the
desktop system unit top cover.
Removing the Desktop Cover
Remove the cover as follows.
CAUTION:
Electrostatic discharge can
damage computer components. Discharge static
electricity before you remove the system unit cover.
1.
Turn off and unplug the system unit and monitor.
2.
Disconnect the keyboard and mouse from the rear of
the system.
3.
Unplug any external options (such as a printer)
connected to the rear of the system unit.
5
Summary of Contents for POWERMATE VP
