![background image](http://html.mh-extra.com/html/nec/powermate-vp/powermate-vp_manual_248722168.webp)
Adding Options 6-53
Minitower Storage Device Installation
Use the appropriate procedures to install storage devices in
your system:
n
To install an accessible storage device, see “Installing
an Accessible Minitower Storage Device.”
n
To install an internal storage device, see “Installing an
Internal Minitower Storage Device.”
Installing an Accessible Minitower Storage Device
Use the following procedure to install an accessible stor-
age device in the system.
1.
Follow the preinstallation instructions that come with
your device, such as setting jumpers and switches.
See “Device Preparation” earlier in this chapter for
device preparation information.
If your 5 1/4-inch device comes with drive
rails, do not attach them. Remove any rails already
attached. See the documentation that comes with
the device.
2.
Remove the system unit cover (see Chapter 5).
WARNING:
Be sure that system power
is
off
and the system and its peripherals are
un-
plugged
before you begin the installation procedure.
Summary of Contents for POWERMATE VP
