manualshive.com logo in svg

NEC POWERMATE VP, Manual

Share
Download
NEC POWERMATE VP Manual Download Page 251

 

  

 Glossary-7

 password

 

A string of characters that the user must enter before the
system allows access or system privileges.

 peripheral

 

Input or output device not under direct computer control.
A printer is a peripheral device.

 pixels

 

Picture elements. Tiny dots that make up a screen image.

 port

 

Provides the means for an interface between the micro-
processor and external devices. A cable connector is usu-
ally plugged into the port to attach the device to the
computer.

 processor

 

In a computer, a functional unit that interprets and exe-
cutes instructions.

 prompt

 

A special symbol indicating the beginning of an input line.
Also a message that appears on the screen indicating that
the user must take a certain action.

 

R

RAM

 

Random Access Memory. A storage device into which
data is entered and from which data is retrieved in a non-
sequential manner.

 read

 

To extract data from a storage device such as a diskette.

Summary of Contents for POWERMATE VP
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands