![background image](http://html.mh-extra.com/html/nec/powermate-vp/powermate-vp_manual_248722072.webp)
2-10 Setting System Parameters
If you change the CD-ROM reader setting
in the multimedia configuration, the CONFIG.SYS
and AUTOEXEC.BAT require changes as well.
Select the IDE Adapter option configuration directly from
the Main Menu summary window. Available options in-
clude:
n
IDE Adapter 0 Master
n
IDE Adapter 0 Slave
n
IDE Adapter 1 Master
n
IDE Adapter 1 Slave.
IDE Adapter 0 configures the primary IDE port, and IDE
Adapter 1 configures the secondary IDE port.
Each IDE Adapter parameter has a right-pointing arrow to
the left of it. Selecting the option displays IDE hard disk
parameters. Select an IDE Adapter option and set parame-
ters for each hard disk separately.
Use the following table to configure the hard disk. If your
IDE hard disk features auto IDE type detection, you need
only to select the Autotype Fixed Disk parameter. The
system then automatically detects the hard disk type and
sets the remaining parameters.
CAUTION:
Use the following IDE Hard
Disk Parameter table only when the system cannot
auto detect any installed optional drive.
An incorrect setting can cause your system to mal-
function and not be able to read your drive.
Summary of Contents for POWERMATE VP
