manualshive.com logo in svg

NEC POWERMATE VP, Manual

Share
Download
NEC POWERMATE VP Manual Download Page 199

 

  

 Solving Problems   8-5

PRODUCT INFORMATION

 

NEC FastFacts™ is a self-help, automated electronic in-
formation service that you can use to obtain up-to-date
product application notes, installation procedures, trouble-
shooting tips, data sheets, technical information bulletins,
illustrated parts breakdowns, and other information about
your system.

 

Using a fax machine, you can obtain information from
the FastFacts service 24 hours a day, 7 days a week.
You simply call the FastFacts number on your touch-tone
telephone, order the information you want through the
voice prompts, and FastFacts will automatically fax you
the information.

 

If you are new to FastFacts, you should first order a cata-
log that lists the available documents and the document
numbers. Current catalogs include:

n

 

Catalog 1, Monitors, Graphics Boards, and Data Pro-
jector Products

n

 

Catalog 2, CD-ROM Hardware and Software, Printers,
and Disk Drive Products

n

 

Catalog 3, Laptop, Desktop, and Server Computer
Products

n

 

Catalog 4, NEC Products for the Macintosh

n

 

Catalog 9, Product and Configuration Index.

 

To order up-to-date technical information on your system,
request document number 273301. This document includes
BIOS versions, technical tips, available bulletin board
files, and current drivers (MS-DOS and Windows video
drivers as well as other system related drivers).

 

A catalog of all current technical information bulletins can
be ordered by requesting document number 72842228.

Summary of Contents for POWERMATE VP
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands