5-8 Repair
Store the slot cover in case you choose to use it in the future.
Figure Section 5-8 Removing the Slot Cover
3 1/2-inch Diskette Drive Removal
Remove the 3 1/2-inch diskette drive as follows.
1.
Remove the system unit cover as previously described (see “System Unit Cover
Removal”).
2.
Unplug the diskette drive power cable and signal cable from the diskette drive
(see Figure Section 5-9).
Figure Section 5-9 3 1/2-Inch Diskette Drive Cables
3.
Remove the four diskette drive screws (two to a side) from the 3 1/2-inch diskette
drive bracket (see Figure Section 5-10 and Figure Section 5-11).
