Technical Information 1-23
Table Section 1-7 Specifications
Item
Specification
Battery
Replaceable 3-volt lithium, non-rechargeable coin-type
Power Supply
115 V/230V switch selectable, 200 Watt
115 V (90-135 V)
230 V (180-265 V)
DC Voltage
+12 V, 6.0 A
+5 V, 22.0 A
+3.3 V, 14.0 A
−
5 V, 0.5 A
−
12 V, 0.8 A
CD-ROM Reader (eight speed) Rotation speed: Inner track 3180 rpm, outer track 1200 rpm
Supported formats: Multisession Photo CD, Audio CD, Video CD,
CD-ROM mode1 and 2, XA ready, CDI (mode2/form1, form2)
Data transfer rate: Sustained 900 KB/sec, burst 14.3 MB/sec,
PIO mode3, DMA mode2
Access time (typical): 140 msec
Built-in buffer: 256 KB/128 KB
Host interface: IDE (ATAPI)
SCSI Adapter Board
PCI local-bus
32-bit bus width
Up to 133 MB/second data transfer rate
Fast and wide 20 MB/second SCSI synchronous data rate
6 MB/second SCSI asynchronous data rate
Bus master DMA interface protocol
SCSI-2 and SCSI-3 device protocol
Extended translation scheme supports up to eight GB per disk
Single-ended, active, or programmable drivers via SCSI
configuration utility
Advanced SCSI Programming Interface (ASPI) compliant, multi-
threaded I/O scatter/gather, tagged queuing, disconnected,
synchronous and asynchronous fast and wide.
