Repair 5-5
Expansion Board Removal
Remove any installed expansion board(s) per the following steps.
1.
Remove the system unit cover (see “System Unit Cover Removal” earlier in this
section).
2.
If you have any cables connected to the board that you need to remove, label the
connectors before you remove them.
3.
Remove the screw that secures the board to the support bracket (see Figure
Section 5-4).
4.
Pull the board out of the connector. You might have to gently rock the board
from side-to-side to release it from its connector.
Figure Section 5-4 Expansion Board Removal
SIMM Removal
Remove any optional SIMM sticks from the system board as follows.
CAUTION:
Reduce static discharge by touching
the system's metal chassis.
1.
Remove the system unit cover as previously described (see “System Unit Cover
Removal”).
