Setup and Operation 2-23
n
Video Mode
n
Mouse
n
Base Memory
n
Extended Memory
n
BIOS Version
System Date/Time
Use this menu to set the current time and date. The settings remain in memory even after
you turn off the system power.
To set the date, enter the current day, month, and year in dd/mm/yyyy format.
To set the time, enter the current hour, minute, and seconds in hh:mm:ss, 24-hour format.
To example, type
13:30:00
for 1:30 P.M.
Diskette Drive
This menu selects the type of diskette drive in your system. Unless you are changing your
hardware, you do not need to change the diskette drive (floppy) A or B settings.
If you add an optional 5 1/4-inch diskette drive to your system, select “Floppy B” and
change the parameter to “1.2 MB, 5.25”.
IDE Devices
The standard hard disk (drive C:) shipped with the system is configured “Primary IDE
Master.” This field reports the presence of, and identification string reported by, up to four
physical IDE drives (two on each PCI/IDE connector). When the cursor is placed on one of
these fields and it is selected by pressing the Enter key, the IDE Device Configuration
Submenu appears (see the following table) allowing the drive parameters to be set.
