Setup and Operation 2-41
NOTE:
You can enter the Setup program with
either a User or Supervisor password. However,
more Setup choices are available with the
Supervisor password.
The Security Submenu lets you check or change the following password parameters.
NOTE:
If neither the User or Administrative
Password is
“
Enabled,
”
the Unattended Start and
Security Hot Key fields are not displayed.
n
User Password
This field allows you to enable a user level password during POST and to enter
Setup. When both the “User Password is” and “Administrative Password is” are
“Enabled,” only the Administrative Password gives you full access to all Setup
fields. This field can be either “Enabled” or “Disabled.” The default is “Disabled.”
n
Administrative Password
This field allows you to enable an administrative level password during POST and
to enter Setup. When both the “User Password is” and “Administrative Password
is” are “Enabled,” only the Administrative Password gives you full access to all
Setup fields. This field can be either “Enabled” or “Disabled.” The default is
“Disabled.”
Set User Password
and
Set Administrative Password
If you enable either or both the User or Administrative Passwords, a dialog box
with the following prompts appears. Passwords are not case sensitive.
To set a password, type the password and press
Enter
. Reenter your password
and press
Enter
.
Enter new password: [ ]
Confirm new password: [ ]
If there is already a User or Administrative Password, a dialog box with the
following prompts appears.
Enter current password: [ ]
Enter new password: [ ]
Confirm new password: [ ]
