3. Standard Features
Express5800/GT110e-S User’s Guide
30
Chapter 1 General Description
3.1
Management Features
The hardware components of the server provide operation control/reliability features as shown below.
Additionally,
NEC ESMPRO Agent
, which is provided in EXPRESSBUILDER, enables you to collectively
manage the state of your systems. You can also monitor the server states from a PC to manage the network
where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
The features available on this server are as shown in the table below.
Function
Availability
Description
Hardware
Shows physical hardware information.
Memory bank
Shows physical memory information.
Device info
Shows information specific to the server.
CPU
Shows physical CPU information.
System
Shows logical CPU information and monitors the load factor.
Shows logical memory information and monitors the status.
I/O device
Shows information on I/O devices ( serial ports, keyboard, mouse, and
video).
System
environment
Temperature
Monitors the temperature inside of the chassis.
Fan
Monitors the fans.
Voltage
Monitors the voltage inside of the chassis.
Power supply
Monitors the power supply unit.
Door
×
Monitors chassis intrusion (open/close of the covers and doors on the
chassis).
Software
Shows service, driver, and OS information.
Network
Shows network (LAN) information and monitors packets.
BIOS
Shows BIOS information.
Local polling
Monitors the values of an MIB item obtained by NEC ESMPRO Agent.
Storage
Monitors controllers and storage devices including hard disk drives.
File system
Shows the file system configuration and monitors the free space.
RAID System
Monitors the following RAID Controllers:
•
On-board RAID Controller (LSI Embedded MegaRAID
TM
)
•
Optional RAID Controller
Others*
Monitors OS stall using the Watch Dog Timer.
Performs alert processing after an OS STOP error occurs.
: Supported.
: Partially supported.
×
: Unsupported.
*: Not displayed on the NEC ESMPRO Manager screen.
Tips
NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server as
standard. For how to install and use each software component, refer to the
explanation of the component.
