1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
69
Chapter 2 Preparations
1.9.3
Installing N8103-153 extra battery
Install an extra battery in the server by using the following procedure.
Note
Read through the user’s guide supplied with the RAID Controller before
installation.
Filling out the date on the Set up date label
Write down the installation date (year and month) on the Set up date label supplied with the extra battery.
Attach the label on the battery cover or somewhere easy to find on the server.
Important The shelf life of the battery pack is about 2 years though actual life depends
on the operating environment and conditions. If it has been used for 2 years
or more, the maximum data backup time is not guaranteed. Replace it soon
with a new battery pack, referring to the user’s guide for the extra battery.
Connecting the battery control cable
Referring to the image below, connect the battery control cable into the battery pack. Check the
orientation of the connector and connect the cable straight into the connector.
Important When installing or removing the extra battery, pay special attention not to apply
excessive pressure on the part of the battery cover marked in the image below.
Otherwise, the part may break.
Fill out the
Set up date
label supplied with the battery
Write the date.
Example:
Y
2012.
M
4
The upper portion is wider than that of lower portion.
