1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
106
Chapter 2 Preparations
Tips
•
N8154-37 2.5-inch HDD cage for additional drives cannot be installed in liquid cooling
model.
•
LED cables attached to the K410-180(00) are not used.
•
If connecting a SATA Hard Disk Drive or solid state drive to an onboard SATA controller
To connect a SATA Hard Disk Drive or solid state drive (hereinafter referred to as
Hard Disk Drive
) to
the SATA controller, the dedicated cable K410-241(00) is required. Connect cables as instructed in the
image below. Match the number on the SATA connector of the cable with the SATA connector number
on the motherboard. Also connect the cable to the SGPIO connector on the motherboard.
Install Hard Disk Drives from Slot 0 in ascending order.
Power
supply
unit
Motherboard
Extra battery (N8103-141/155)
Optical disk drive
Slot 0: First Hard Disk Drive
Slot 1: Second Hard Disk Drive
Slot 2: Third Hard Disk Drive
Internal SATA cable (K410-180(00))
SATA cable (for use with the optical disk drive)
MB SASBP signal cable (attached to the 2.5-inch expansion
HDD cage)
Battery cable (attached to the expansion battery)
RAID Controller
(N8103-128/149/150/151)
SATA cable (attached to the 2.5-inch expansion HDD
cage)
2.5-inch expansion HDD cage
Slot 4: Fourth Hard Disk Drive
Slot 5: Fifth Hard Disk Drive
(When 5 Hard Disk Drives are installed)
