2. Installation and Connection
Express5800/GT110e-S User’s Guide
116
Chapter 2 Preparations
2.2
Connection
Connect peripheral devices to the server. Connectors that allow a variety of peripheral devices to be
connected are provided at the front and rear of the server. Images on the following pages show the
peripheral devices that can be connected in their standard state and their respective connector positions.
First connect the peripheral devices and then connect the power cord to the server. After that, connect the
power plug to the outlet.
WARNING
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, refer to
Safety precautions
in
Precautions for Use
.
•
Do not hold the power plug with wet hands.
CAUTION
Be sure to observe the following precautions to use of the server safely. Failure
to observe the precautions may cause burns, injury, and property damage. For
details, refer to
Safety precautions
in
Precautions for Use.
•
Use only the specified outlet to insert.
•
Do not connect the power cord to an outlet that has an illegal number of
connections.
•
Insert the power plug into the outlet as far as it goes.
•
Use only the specified power cord.
•
Do not connect or disconnect the interface cable while the power cord is
connected.
•
Use only the specified interface cable.
