1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
67
Chapter 2 Preparations
Installing a battery pack to 3.5-inch Hard Disk Drive models
(1) Remove one screw from the blank cover and slide it to the side to release the blank cover.
(2) Pass the bracket containing the battery and which is connected to the remote cable through the
opening from which the blank cover was removed.
(3) Engage the tabs of the bracket with the grille of the blank cover and fix it with the attached
screw (large). Refer to the image below for the installation position.
Pass through the remote cable
equipped with the battery from
inside to outside the unit.
