Setting System Parameters 3-5
■
Advanced — Use this menu to set integrated peripherals:
serial and parallel port addresses/interrupts, enable or
disable the diskette drive controller, select monitor type,
and enable or disable the VGA feature connector.
The menu provides menu items for setting advanced
chipset control, enabling or disabling Plug and Play, and
setting PCI device parameters.
The menu also lets you set parameters for large disks
(for example, to use large disks with Windows NT).
Some of the Advanced features may be accessible only
with a Supervisor password.
■
Security — Use this menu to edit and set Supervisor and
user IDs and passwords, set Backup and Virus-check
reminders, set network and diskette access, and enable
write-protection for the hard disk.
■
Exit — Exits the current menu.
To select an option from the menu bar, use the left and right
arrow keys.
See “Exiting Setup” in this chapter for a description on
exiting the Setup menu.
The Legend Bar
Use the keys listed in the legend bar on the bottom of the
Setup menu to make your selections or exit the current
menu.
The following table describes the legend keys and their
alternates.