NEC IMAGE P100E - SERVICE Manual Download Page 179

Page: 179 / 235

Adding Options 7-53

Turn off and unplug the system unit and any external
option connected to the system unit.

Make sure that your printer power is off and the power
cable is unplugged.

Connect the printer cable to the printer port on the rear
of the system unit. Secure the cable as follows.

■

Secure the system unit connection with the screws
provided.

■

Lock the connector to the printer with the connector
clips.

Connecting a printer cable to the system unit

Plug in the system and printer power cords, and turn
power on.

Printer Port

Printer Cable

Summary of Contents for IMAGE P100E - SERVICE












































































































































































































































Search results

Summary of Contents for IMAGE P100E - SERVICE

Reviews:

Related manuals for IMAGE P100E - SERVICE

Brands by name

Popular brands

NEC IMAGE P100E - SERVICE, Manual

Search results

Summary of Contents for IMAGE P100E - SERVICE

Reviews:

Related manuals for IMAGE P100E - SERVICE

Brands by name

Popular brands