manualshive.com logo in svg

NEC IMAGE P100E - SERVICE, Manual, Page: 12 / 235

Share
Download
NEC IMAGE P100E - SERVICE Manual Download Page 12

    

 xiv   Using this Guide

 In addition to the documentation that ships with your
system, the following documentation is available from
NEC:

■  

Image P90E/P100E Service and Reference Manual
(part number 819-181048-000) provides information for
maintaining, troubleshooting, and repairing the system.
This manual also includes hardware and interface
information for programmers, engineers, and others who
need to know how the system is designed.

 To purchase the service and reference manual, call NEC
at 1-800-

632-4525

 and follow the prompts. When

prompted, provide the document name and part number.

 NEC also offers FastFacts™, an automated service that
sends the latest information about NEC and its products
directly to a fax machine. The service is available 24 hours
a day, 7 days a week.

 With FastFacts, you can obtain product literature and
technical information bulletins. By using FastFacts, you can
be kept up-to-date on the latest technical information for
your Image system.

 See “Product Information” in Chapter 1 for information
about using FastFacts.

Summary of Contents for IMAGE P100E - SERVICE












































































































































































































































Reviews:

No comments