manualshive.com logo in svg

NEC IMAGE P100E - SERVICE, Manual, Page: 115 / 235

Share
Download
NEC IMAGE P100E - SERVICE Manual Download Page 115

    

 Using NEC Utilities and Drivers   5-5

 Your system ships with the following Windows video driv-
ers pre-installed on the hard disk (hard disk models only).
Drivers are also provided on the Auxiliary Diskette shipped
with the system.

■  

640 by 480 with 16 colors

■  

640 by 480 with 256 colors

■  

640 by 480 with 64,000 colors

■  

640 by 480 with 16.8 million colors

■  

800 by 600 with 16 colors

■  

800 by 600 with 256 colors

■  

800 by 600 with 64,000 colors

■  

800 by 600 with 16.8 million colors

■  

1024 by 768 with 16 colors

■  

1024 by 768 with 256 colors

■  

1024 by 768 with 64,000 colors

■  

1280 by 1024 with 16 colors

■  

1280 by 1024 with 256 colors.

 The default Windows video resolution is 640 by 480 with
256 colors. For an optimum screen display, you can set
video modes and refresh rates through the TLIMODE
utility, also preinstalled on your system.

 To change the video drivers in Windows, use Windows
Setup and click on the Windows Setup Extension VIDEO
button. Select the driver and resolution you want and the
driver will load from the hard disk drive or instruct you to
install the Auxiliary Diskette.

Summary of Contents for IMAGE P100E - SERVICE












































































































































































































































Reviews:

No comments