NEC Express5800/R140a-4, User Manual

Page: 324 / 520

8-46 Troubleshooting
Fail to access (read or write) to the floppy disk:
T
Does the floppy disk drive contain a floppy disk?
→
Insert a floppy disk into the floppy disk drive until it clicks.
T
Is the floppy disk write-protected?
→
Place the write-protect switch on the floppy disk to the "Write-enabled" position.
T
Is the floppy disk formatted?
→
Use a formatted floppy disk or format the floppy disk in the floppy disk drive.
Refer to the manual that comes with the OS for formatting a floppy disk.
T
Is BIOS configuration correct?
→
The USB device may be disabled with the BIOS setup utility of the server.
Check the setting with the BIOS setup utility.
<Menus to check: [Advanced] - [I/O Device Configuration] - [Legacy USB
Support]>
Fail to access to the CD/DVD-ROM:
T
Is the CD/DVD-ROM properly set in the optical disk drive tray?
→
The tray is provided with a holder to secure the CD/DVD-ROM. Make sure that
the CD/DVD-ROM is placed properly in the holder.
T
Is the CD/DVD-ROM applicable to the server?
→
The CD/DVD-ROM for Macintosh is not available for use.