NEC Express 5800/120Lh, User Manual, Page: 59 / 314

Setting Up Your Server 3-5
When you have selected a server site, hold the server by its bottom with at least three persons and
carry it to the site, then place it slowly and gently.
IMPORTANT:
Do not hold the server by its front door to lift the
server. The front door may be disengaged and damage the server.
Do not place the server in the following places. Placing the server in such places may cause
malfunctions of the server.
„
Places with drastic changes in temperature (e.g., near a heater, air conditioner, or
refrigerator)
„
Places with strong vibration
„
Places with corrosive gas in presence, near chemicals, or with possibilities of chemicals
sprayed over
„
On a non-antistatic carpet
„
Places with possibilities of falling objects
„
Places where a power outlet that shares the ground line with another (especially the one to
which a device with large power consumption is connected) must be used for the server
„
Do not install the server near equipment that generates power noise (e.g., contact spark at
power-on/power-off of commercial power supply through a relay). (To install the server
near equipment that generates power noise, ask your sales agent for separating the power
wiring or installing a noise filter.)