NEC Express 5800/120Lh, User Manual, Page: 129 / 314

Installing the Operating System with Express Setup 5-37
Setting for Solving Problems
Setup the following issue in advance so that your computer can recover from any trouble precisely
and as soon as possible when it should occur.
Memory Dump (Debug Information)
This section describes the procedures for collecting memory dump (debug information) in the
server.
IMPORTANT: Cautions for the Memory Dump
„
The staff of maintenance service representative is in charge of
collecting memory dump. Customers need only to specify the
memory dump.
„
If any trouble occur after specifying the process below, the
message to inform that the system is in short of virtual memory
may appear, but continue to start the system. If you re-start the
system in such case, memory dump may not be stored correctly.
Follow the procedure below to specify.
1.
Point to [Settings] in Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2.
Double-click [System].
The [System Properties] dialog box appears.
3.
Click [Advanced].
4.
Click [Startup and Recovery].
5.
Enter the location to write the debug information to the text box.
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP