NEC Express 5800/120Lh, User Manual, Page: 310 / 314

E-12 Installing Windows 2000
Install Graphics Accelerator Driver Mounted in Standard
Install the display driver using the following procedure.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K\SETUP.EXE
* Install the graphics accelerator driver in the following directory if you communicate
your server with the remote KVM console. (Optional advanced remote management
card (N8115-02) must be installed in your server to use the remote KVM console.)
<CD-ROM Drive Letter>:\N8115-02\VIDEO\RADEON7000\SETUP.EXE
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue. If the dialog message "Direct X Ver.8 isn't installed." appears, select [continue]
to continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
USB 2.0 Driver
USB 2.0 Driver is pre-installed. When restoring the system or re-installing the system, the driver is
automatically installed in the process of updating the system.
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.