NDD easyone pro Operator'S Manual Download Page 76

Page: 76 / 188

Performing a Test

EasyOne Pro™ / EasyOne Pro™ LAB



Click the

History

button (Fig. 3-35).

A window listing all tests stored for this patient will appear.

The displayed tests can be sorted by



test protocol (

Base

Pre

Post

)



test type (

FVC

SVC

MVV

)



test date



comment.



To do so, click on the appropriate title in the column headers.



Highlight the test to view.



Click

View Test

to view the test,

Print Preview

to view the test before

printing it,

Print

to print the test, or

Trend

to view the trend display (see

"Trend View"

on page 78). Click

Patients

to display the patient list and

click

New Test

to display the test selection menu.

Note

Alternative: Double-click on a test to display it.

Fig. 3-35

Retrieving/printing stored tests

Fig. 3-36

Test list

Summary of Contents for easyone pro





























































































































































































Search results

Summary of Contents for easyone pro

Reviews:

NDD easyone pro, Operator'S Manual, Page: 76 / 188

Search results

Summary of Contents for easyone pro

Reviews: