Napoleon HYBRID 150, Operating Instructions Manual

Page: 35 / 132

W415-0910 / A / 09.16.10
35
REQUIRED COMPONENTS: • HMF150 Hybrid Furnace
• HMFK-BMP33 Blower Box Module
• HMFK-EF20 Electric Furnace Module
• HMFK-SOLID or HMFK-GLASS Door Kit
STEP #5
○ Completely assemble HMF150 in required left or right hand "RA"
con
fi guration as required.
○ Locate and level HMF150 while maintaining minimum 1.25" clearance
space between bottom of furnace and
fl oor.
○ Use the levelling legs to compensate for uneven fl oor and snug the
lock nuts up to furnace base to prevent movement through vibration.
STEPS #1 - #4
Follow Steps 1 to 4 from SECTION 5.1 - HYBRID HMF150 AS AN "ADD ON" TO EXISTING FURNACE.
STEP #6
○ Remove contents of the blower module kit and compare with contents list on "manual" addendum
accompanying the blower module.
STEP #7
○ Remove contents of the electric furnace module kit and compare with contents list on "manual" addendum
accompanying the electric furnace module.
STEP #8
○ Place the blower module and the electric furnace module beside each other as per diagram:
LOCK NUT
LEVEL LEG
ELECTRIC FURNACE
CONTROLS
ELECTRIC FURNACE
MODULE
BLOWER HOUSING
MODULE
LEFT HAND RA CONFIGURATION
RIGHT HAND RA CONFIGURATION
○ Align holes in the adjacent top and side fl anges, and
secure with 9 x ¼" hex head wildrill screws.
NOTE
Top/bottom fl ange screws
thread into blower. Side
fl ange screws thread into
electric unit.
STEP #9
○ Place the open side of electric furnace against rectangular inlet window on the side panel of HMF150
furnace. Adjust the levelling legs on the blower box module so that the electric furnace module is level and
holes on the mounting
fl anges align with pilot holes on side of furnace panel.
5.4 HYBRID HMF150 AS A COMBINATION “WOOD/ELECTRIC” FURNACE