18
2.
load one long paper at a time with the front page face down and
the top edge first. Slide the paper straight into the scanner until it
meets resistance.
3.
Adjust the Paper Guides to fit the width of the paper.
Do not make the Paper Guides too tight against the paper, because
that can cause problems to feed.
NOTES
•
Select “long Sheet” from the Scan Size setting when scanning
a long document exceeding 356mm (14”) up to 3000mm (118”)
(see
Adjusting the Setting tabs > Scan Settings > Scan Size
).
•
If the document exceeded the maximum support length for the
ADF, the scanning will stop with an error message appeared. the
exceeded part of the document will not be scanned.
•
Secure the long paper with your hands during scanning to prevent
paper being fed skewed, which can result in damage to your
original.
•
ensure the Output tray is fully extended for the long paper to be
outputted from the ADF to prevent the paper jam.
lOADING the INPUt tRAy
(cONtINUeD)
Summary of Contents for idocscan p100
Page 70: ...P100 P70 P45...
