5
Attaching and Extending the Tray
When you unpack this package first time you will need to assemble the
Input tray prior to use.
IMPORTANT:
make sure to remove all packaging and tapes from the
Scanner before use.
1.
hold the Input tray, then insert locking tabs on the Input tray into
the slots on the top of the Scanner.
1
2
2.
Push in the locking tabs into the slots to snap them into place.
1
2
3.
Pull the Output tray completely out, and lift up the Stopper at the
end of the Output tray.
4.
If necessary, pull out the Input tray extension and then unfold the
Support Flap.
UNPAckING AND ASSemblING the ScANNeR
(cONtINUeD)
Summary of Contents for idocscan p100
Page 70: ...P100 P70 P45...
