Page 26 of 62
© 2021 Multidyne
FN-64-CHAS Product Manual
commands have been superseded by System Parameters in MDCP protocol version 3.0.
Command
Arguments
Description
DHCP
[0 | 1]
DHCP enable.
FrameIP
[IP]
Remote router IP address the panel will control.
Gateway
[IP]
Network gateway IP address.
IP
[IP]
System IP address.
MAC
MAC address.
MapDest
[Dest][Dest][Lvl]
Matrix destination remap command.
MapSrc
[Src][Src][Lvl]
Matrix source remap command.
MtxGroup
[Number][Number]
I/O grouping command.
NetMask
[Netmask]
Network mask.
PairIO
[0 | 1]
I/O pairing enable.
Superseded by the MtxGroup command.
PanelCmd
[Button][Cmd]
Panel button/GPIO command macros.
PanelCmdEn
[0 | 1]
Enable panel button/GPIO command macros.
PanelCond
[Button][Cond]
Panel button/GPIO status conditions.
PanelDis
[0 | 1]
Internal panel button interface disable.
PanelExtEn
[0 | 1]
External panel interface enable (if available).
PanelOfs
[Dest][Src][Lvl][Lvl]
Button panel destination/source offsets and levels to control.
PanelRate
[Number]
Remote panel refresh rate.
SerBaud
[Number]
Query or assign serial baud rate.
SysName
[String]
System name.
Vars
Query all system configuration variables.
WebPass
(String)
Assign web password.
3.10
Miscellaneous Commands
These additional commands consist of those which are not commonly used, not considered to be a core part of the MDCP
protocol, and support is most likely to vary between system types and firmware versions.
Command
Arguments
Description
C
Query system matrix info, which is displayed in the format
DESTS,SRCS,LEVELS,FLAGS1,FLAGS2.
Superseded by the MtxCfg command.
LockStatus
Get video lock status and rate detection information (not all HD router
systems are supported).
ReclkDis
[0 | 1]
Disable SDI reclockers (not all SDI router systems are supported).
RemoteSync
[0 | 1]
Query or assign remote router syncing. Useful for creating a 3D system out
of 2 routers.
3.10.1
C Command
Routers only
NOTE:
Superseded by the MtxCfg Command.
The C command queries the matrix size. The response is in the format “Dests,Srcs,Levels,Flags1,Flags2”.
Where “Dests” is the count of system destinations, “Srcs” is the count of sources and “Levels” is the number of
system levels. The Flags1 and Flags2 fields are currently unused and will be 0.
