MultiDyne FiberNet FN-64-CHAS, Instruction Manual

Page: 42 / 62

Page 42 of 62 © 2021 Multidyne www.multidyne.com
FN-64-CHAS Product Manual
3.10.29
PClr Command
Routers only
Clear a preset. For Preset 0 this sets all Destinations to Source 0. Other Presets are assigned “No Change” to
all Destinations. This command stores preset information which is available through system power cycles.
Command Description
PClr PRESET Clear a preset.
Example to clear preset 1
>PClr 1
>
3.10.30
ProtoSer Command
Carina series only
NOTE: Superseded by the ctl.serial.proto and ctl.serial2.proto System Parameters.
Query or assign the serial protocol. The only available option is currently the case insensitive value "MDCP",
however additional control protocols may be added in the future. Value is stored and recalled on power up.
Command Description
ProtoSer Query the protocol used on the serial port.
ProtoSer PROTO Assign the protocol used on the serial port (the only valid value is
currently "MDCP").
Examples
>ProtoSer
MDCP
>
3.10.31
PsetNames Command
Routers only
Query or assign preset names. Preset names are stored and recalled on power up.
Command Description
PsetNames Query all preset names.
PsetNames PRESET Query a single preset name.
PsetNames PRESET, LABEL Assign a preset label.
When querying names, labels are surrounded by double quotes and separated by newlines.
Examples
>PsetNames
“Startup”