Page 15 of 62
© 2021 Multidyne
FN-64-CHAS Product Manual
selected destination is highlighted in red (
#7
in Figure 25). For multi-level systems either the destination or one
of the levels can be individually selected for changing all levels or a single level.
The left side of the Routing tab under the title “Connect Source” (
#5
in Figure 25) displays all the available
sources and Mute (if available) to connect from.
2.2.1
Changing a connection
To change a routing connection, select the desired destination by clicking on the Destination label or an
individual level source label (multi-level systems only). Then click on a Source button or Mute (if available)
from the “Connect Source” section. The clicked source will be connected to the selected Destination for one or
more levels (depending on if the Destination or a single level is selected).
2.2.2
Loading a preset
Presets store connection states for one or more Destinations. Loading a Preset on the Routing tab consists of
simply clicking on the “Load preset” drop down selector (
#4
in Figure 25) and selecting the desired preset,
which is then loaded and applied to the current routing matrix. More information on Presets is contained in the
following Presets tab section.
2.3
Presets Tab
Figure 26 depicts the Presets Tab which can be used to edit presets or perform batch matrix connection
operations. Under the “Connections” title is shown the
Work Matrix
, which is a temporary area for working with
matrix routing and loading to/saving from stored Presets and the current Active Routing state
. For each Destination the
Destination number and label is displayed followed by one or more drop down selection lists for each source
level. The selection lists contain all available sources (listed by source number and label) and the special values
No Change
and
Mute
(the latter only if available for the given level). The
No Change
option indicates that the
Destination for the given Level should not be changed from its current value, when the preset is recalled, which
allows for a subset of the routing matrix to be changed.
Mute
will output blank Video or silent Audio for the
given Destination level and is not supported on all routers/levels.
Figure 26: Presets Tab
