Page 14 of 62
© 2021 Multidyne
FN-64-CHAS Product Manual
2
Web page interface
2.1
Overview
All Multidyne Router and Remote Panel systems include a built in web page that can be used with standards
compliant Javascript enabled web browsers, including but not limited to Firefox, Chrome, Safari and recent
versions of Internet Explorer.
Figure 25 shows the Routing tab of a 16x16 switcher with 2 levels with numbered outlines to aid in further
description below. The web page interface for other router systems is sized appropriately. Remote Panels show
only the Config and Command tabs.
Numbered sections in Figure 25
1.
System name (can be assigned on the Config tab)
2.
System firmware series and version
3.
Tab navigation
4.
Preset load drop down selection
5.
Source connect buttons
6.
Mute button (may not be available on all switchers and levels)
7.
Currently selected destination (destination name followed by currently connected source names for both
levels).
2.2
Routing Tab
The right side of the Routing tab interface under the title “Connections” displays the current state of the routing
matrix. Each destination is depicted as a box containing the destination number/label followed by one or more
source numbers/labels of the currently connected sources for each level of the destination. The currently
Figure 25: Routing Tab
