MultiDyne FiberNet FN-64-CHAS, Instruction Manual

Page: 37 / 62

Page 37 of 62 © 2021 Multidyne www.multidyne.com
FN-64-CHAS Product Manual
Address section for this device.
Command Description
NetMask Query network mask value.
NetMask NETMASK Set network mask value.
Example querying and assigning netmask
>NetMask
255.255.255.0
>NetMask 255.255.255.192
>
3.10.20
P Command
Routers only
Recalls a preset. Each Router system contains 10 presets numbered 0 through 9 which can store the entire
matrix routing state or one or more single destination connections. Preset 0 is recalled on system power up.
Command Description
P PRESET Recall a preset.
Example to recall preset 1
>P 1
>
3.10.21
PAdd Command
Routers only
Preset add command. Adds a connection to a preset. This can be used to incrementally create a preset without
changing the active matrix routing. 0 can be used for SRC for Mute (if supported). This command stores preset
information which is retained and available through system power cycles.
Command Description
PAdd PRESET, DEST, SRC Add a connection of SRC to DEST on PRESET for all levels.
PAdd PRESET, DEST, SRC, LEVEL Add a connection of SRC to DEST/LEVEL on PRESET.
Example
>PAdd 1,2,3
>PAdd 1,3,0,2
>
The first command adds a connection from Source 3 to Destination 2 in Preset 1. The second command Mutes
Destination 3 on Level 2 in Preset 1.
3.10.22
PairIO Command
Routers only - Protocol Version: 2.1