Page 8 of 62
© 2021 Multidyne
FN-64-CHAS Product Manual
male straight through cable to a control system, such as a computer. Use 115200 bps 8N1 as the serial
configuration and enable local echo to see typed characters.
See Serial Interface Pinout for additional details.
•
RS-485 Serial (Optional)
– An RS-485 port is also available utilizing pins on the same D9 connector as the RS-232
interface. This port is configured as a MDCP Protocol control interface by default, but can also be used to control other
routers as additional matrix levels. See Serial Interface Pinout for additional details.
•
General Purpose I/O
– A D25 connector provides a GPIO auxiliary port with up to 24 input or output
3.3V logic lines for control and status interfacing with external equipment (LEDs, buttons, etc). See
GPIO Auxiliary Interface for more details.
1.2
Video I/O Boards
The Fibernet Router Matrix modular router can be configured or expanded in the field for matrix sizes in
increments of 8 inputs or outputs. Each input card adds 8 SDI video BNC or SFP module inputs, depending on
the card (
FN-8-IN-BNC
as shown in Figure 2 or
FN-8-IN-SFP
in Figure 3 respectively). Each output card adds
8 SDI video BNC or SFP module outputs (
FN-8-OUT-BNC
as shown in Figure 4 or
FN-8-OUT-SFP
as shown
in Figure 5).
Figure 2:
FN-8-IN-BNC SDI SFP Input Module
Figure 3:
FN-8-IN-SFP SDI SFP Input Module
