Page 55 of 62
© 2021 Multidyne
FN-64-CHAS Product Manual
5.
Execute the following commands from within the tftp program, pressing ENTER after each line, except
the last one, to prepare the TFTP transfer:
binary
put MD-Pyxis-Firmware-x.x.x.img
6.
Make sure to replace MD-Pyxis-Firmware-x.x.x.img with the correct version number of the file.
7.
Pressing ENTER after the put command will initiate the TFTP transfer. Make sure to perform the
necessary actions to prepare the system for an update, prior to attempting the transfer.
8.
The TFTP program will indicate if the transfer was successful or not.
9.
If the transfer failed (timed out, etc), retry the
put
command or quit the application (type 'quit' and
ENTER) and start over from step 4.