Virtual ECU application
Parameter
9
30322538-02-EN
V9.20191001
63
▪
Sprayer
▪
Soil tillage
Connector type
Use this parameter to define the connector type of the agricultural implement.
The following connector types are possible:
▪
Unknown
▪
Drawbar
▪
3-point hitch mounted
▪
3-point hitch semi-mounted
▪
Hitch hook
▪
Clevis coupling
▪
Piton-type coupling
▪
CUNA hitch
▪
Ball-type hitch
Machine model
This parameter influences how the working bar follows the arrow in TRACK-Leader. The
configuration improves the precision of the recording of applied areas in curves.
After each change, you also need to adjust the geometry.
Possible values:
▪
“mounted”
Setting for implements that are mounted on the tractor three-point hitch.
▪
“trailed”
Settings for implements trailed by a tractor. The working bar is guided like a trailer behind a
tractor.
Working width
This parameter shows the working width set for an implement.
Number of sections
Enter the number of sections that can be switched off on the implement. On a field sprayer, they are
the section valves; on a fertilizer spreader or a planter/seeder, they can be e.g. metering units.
This parameter serves to transmit the proper number of sections to the SECTION-View module, so
that you can switch the sections manually.
Each section appears as part of the working bar on the screen.
Sections
Opens a screen where you can enter the width of the individual sections on the implement.
Geometry
The geometry contains a series of dimensions that help to properly display the vehicle-implement
combination in TRACK-Leader and determine its position.
