Connecting and configuring external devices
GPS receiver
6
30322538-02-EN
V9.20191001
33
If the parameter is set to “automatic”, you prevent the vehicle from driving directly to the new
GPS position. The system will then gradually steer towards the new GPS position. This prevents
the occurrence of large track offsets in case of RTK failure.
When the RTK signal is available again, the vehicle will be gradually steered towards the original
GPS position.
▪
deactivated
The parameter is deactivated.
Tilt module
The GPS TILT-Module is configured using this parameter.
You can order the tilt module from Müller Elektronik with the following item number: 30302495.
RTK or L band licence for SMART-6L
You will need a SMART-6L DGPS/GLONASS receiver and RTK license in order to work with RTK
correction signals.
To work with TerraStar correction signals, you need a SMART-6L DGPS/GLONASS receiver and at
least an L band license.
When purchasing a GPS receiver with an RTK or L band license, the licence from Müller-Elektronik
will be entered. You only have to enter the licence yourself when it is purchased at a later date.
1.
- Open the “Service” application.
2.
Tap “GPS”.
⇨
The “Settings” screen appears.
3.
- Open the license menu.
4.
Tap “License code”.
⇨
The “License menu” screen appears.
⇨
You can see the serial number and firmware version on the screen. You will need these
when ordering the license code.
⇨
If you are using the TerraStar correction signal, you will see information on the TerraStar
service and the expiry date of the TerraStar service.
⇨
Optionally, you can open the “Model number” screen to obtain information on the current
activation of the GPS receiver.
5.
Enter the license code.
6.
- Confirm.
GSM modem for SMART-6L
If you are using the DGPS/GLONASS SMART-6L receiver with a GSM modem, you can adjust the
existing configuration.
1.
- Open the “Service” application.
2.
Tap “GPS”.
3.
The “Settings” screen appears.
Procedure
Procedure
