Configuring the terminal in the Service application
Changing the language
7
30322538-02-EN
V9.20191001
45
Configuring the terminal in the Service application
Changing the language
If you change the language in the Service application, you also change the language for all
applications and the ISOBUS job computer.
If a connected ISOBUS job computer cannot activate the selected language, a standard language will
be activated.
1.
- Open the “Service” application.
⇨
The application start screen appears:
2.
Tap “Terminal”.
⇨
A list of parameters appears.
3.
Slide your finger over the terminal screen from the bottom to the top.
⇨
New parameters appear.
4.
Tap “Language”.
⇨
A list of abbreviations of available languages appears.
5.
Tap the abbreviation for your language.
⇨
The abbreviation is marked with a green dot.
6.
- Confirm.
⇨
The “Terminal” screen appears.
7.
Restart the terminal.
Basic terminal settings
The basic settings include: Language, Time, Measurement units.
All settings which you make here will also apply to other applications and in connected ISOBUS job
computers.
1.
- Open the “Service” application.
7
7.1
Procedure
7.2
Procedure
