6
Connecting and configuring external devices
Crop protection sensors
44
V9.20191001
30322538-02-EN
1.
Connect the sensor to the ISOBUS.
2.
Follow the instructions from the sensor manufacturer. The terminal does not need to be
configured.
To work with serial connection sensors:
1.
Connect the sensor to the serial port of the terminal.
2.
Create a virtual job computer in the Virtual ECU app. [
3.
In the “External controller” [
62] parameter, select the sensor type.
4.
Activate the job computer for the sensor.
⇨
You have activated the sensor.
⇨
The terminal transmits all target rates to ISOBUS-TC, the ISOBUS job computer and TRACK-
Leader.
Special case
If you are working with your machine in mixed operation, with ISOBUS and serially connected
sensors, you must observe the following sequence:
The serial sensor is connected to the serial interface of the terminal.
1.
Connect the ISOBUS components to the ISOBUS.
2.
Start the Virtual ECU [
61] app.
3.
Create a virtual job computer in the Virtual ECU app. [
4.
In the “External controller” [
62] parameter, select the sensor type.
5.
Activate the job computer for the sensor.
⇨
You have activated the sensor.
6.
Set the connectors in the list of connections.
⇨
The terminal transmits all target rates to ISOBUS-TC, the ISOBUS job computer and TRACK-
Leader.
Procedure
Procedure
