Muller TOUCH800, Installation And Operating Instructions Manual

Page: 4 / 85

Table of contents
4 V9.20191001 30322538-02-EN
5.8 Hiding an application 25
5.9 Using the keyboard 25
5.10 Using a memory device 26
5.10.1 Using SD card 26
5.10.2 Folders on the USB memory device 26
5.10.3 Displaying the content of the memory device on the terminal 27
6 Connecting and configuring external devices 28
6.1 GPS receiver 28
6.1.1 Connecting the GPS receiver to the terminal 28
6.1.2 Changing the driver for the GPS receiver 28
6.1.3 Configuring the GPS receiver 30
Parameters for the GPS receiver 30
RTK or L band licence for SMART-6L 33
GSM modem for SMART-6L 33
Configuring the GPS receiver for the steering system 34
6.1.4 Recording GPS position 35
6.1.5 Configuring the “GPS TILT-Module” tilt module 36
6.2 Configuring the joystick button allocations 36
6.3 Connecting sensors to the terminal 37
6.4 Camera 38
6.4.1 Connecting the camera to the terminal 38
Connecting the camera HQ2 38
Connecting the camera NQ 39
6.4.2 Activating a camera 39
6.4.3 Operating the camera 40
6.5 External lightbar 40
6.5.1 Connecting the external lightbar to the terminal 40
6.5.2 Activating an external lightbar 41
6.6 Connecting the on-board integrated display/controller to the terminal 41
6.7 ISO Printer 42
6.7.1 Connecting the ISO printer to the terminal 42
6.7.2 Activating ISO Printer 43
6.8 Configuring the Bluetooth connection in the Connection Center 43
6.9 Crop protection sensors 43
7 Configuring the terminal in the Service application 45
7.1 Changing the language 45
7.2 Basic terminal settings 45
7.3 Activating and deactivating applications 47
7.4 Unlocking licenses for full versions 48
7.5 Creating screenshots 49
7.6 Deleting pools 49
7.7 Using the Open Data Interface 49
7.7.1 Activating ME ODI 50
7.7.2 Opening ME ODI 50