Connecting and configuring external devices
Configuring the Bluetooth connection in the Connection Center
6
30322538-02-EN
V9.20191001
43
Activating ISO Printer
In order to activate the ISO printer, you must activate its driver.
1.
- Open the “Service” application.
2.
Tap "Driver".
3.
Tap “ISOPrinter”.
⇨
The installed drivers appear.
4.
Tap “ISO Printer”.
5.
- Confirm.
6.
Restart the terminal.
Configuring the Bluetooth connection in the Connection Center
If you connect a bluetooth stick to the terminal, you can couple the terminal with another bluetooth
device (e.g. a smartphone).
This allows you to use the ME ODI (Müller Elektronik Open Data Interface) [
13] application.
1.
Connect the USB bluetooth stick to the terminal.
2.
- Open the “Service” application.
3.
Tap "Driver".
4.
Activate the “Connection Center” driver (value: Connection Center)
5.
Restart the terminal.
6.
- Open the “Service” application.
7.
Tap on “...”.
8.
Tap on “Connection Center”.
⇨
The “Connection Center” screen appears.
9.
Tap on “Bluetooth”.
Crop protection sensors
Crop protection sensors measure the plant requirements during operation. Depending on the sensor,
the results are transmitted as a target rate to the job computer of the fertilizer spreader or sprayer.
The terminal can communicate with crop protection sensors through two interfaces:
▪
ISOBUS - If a sensor communicates via ISOBUS, it is automatically detected by the terminal.
The target rates are transmitted directly to the job computer.
▪
Serial - If a sensor only communicates through the serial interface, you must connect it to the
81]. Then you must create a virtual job computer for the sensor in
61] app. Activate the virtual job computer before starting operation.
To work with ISOBUS sensors:
6.7.2
Procedure
6.8
Procedure
6.9
Procedure
